The most nerve wracking experience of our bus build project to date? Cutting through our beautiful new butcher block countertop! We are under mounting both the sink and the stove top, so the edges need to be clean and nice. But we got it done as a team.
Our sink wasn’t meant to be under mounted, but we did it anyway. We built a frame to support the sink. The difficulty was getting it flush up to where the countertop will sit so there were no gaps. This took four hands and a lot of clamps to hold it into place before gluing and screwing it in.
The stove top was a little easier. It is mounted to a shelf that we fit below the countertop. On top will be a hinged portion of the counter that can open when we need to cook, and close when we need the extra workspace.
Cutting the hinged panel and the block that will rest over the sink was done with just a circular saw and a good old fashioned hack saw. The edges aren’t pretty yet, but once sanded I think everything will look great! To be continued.